Applications/Usage of PLA
PLA has a lot of applications in extrusion, injection molding, film, spinning and other areas of application .
Products made of polylactic acid in addition to biodegradability ,therefore use very widely used as packaging materials,
fibers and non-woven fabrics ,etc .,mainly used for clothing (underwear ,outerwear ) ,industry (construction ,agriculture ,
forestry ,paper ) ,and health and other fields.
1)Clothing and other household fabrics
2)Agricultural and horticultural cloth
3)Bags, packaging film ,Agricultural film, foam ,tableware
PLA plastic advantages:
--Adequate sources of raw materials,
--Low energy consumption
--Good biodegradability
--Good mechanical properties and physical properties
--Good security
How to do the improvement ?
In order to optimize the desired performance improvement ,Agriope ® toughener or impact modifier is an improved low-
temperature embrittlement of polymer materials ,giving it a higher toughness or flexibility chemicals.Improving the impact strength of compounds is key additives.
Protecting against loss of strength, stiffness, flexibility & surface integrity such as cracking .
Impact modifiers compensate for inherent brittleness ,or embrittlement occurring at subzero temperatures ,notch-sensitivity and crackness .
|
Test Items
|
Nominal Value
|
Test Method
|
|
Tensile Strength Mpa
|
26
|
GB/T 1040-2006
|
|
Flexural Strength Mpa
|
43
|
GB/T 9341-2008
|
|
Charpy Notched Impact Strength KJ/M2
|
11.5
|
GB/T 1043-2008
|
|
Shore D hardness
|
75
|
GB/T 2411-1980
|
|
Heat Deflection Temperature(1.80MPa) ℃
|
71
|
GB/T 1634-2004
|
|
Vicat Softening Temperature ℃
|
89
|
GB/T 1633-2000
|
|
MeltingPoint ℃
|
123
|
HG/T 235-91
|
|
Melt Mass-Flow Rate (220℃/10kg) g/10min
|
22
|
GB/T 3682-2000
|
Polymer impact modifiers for PLA
The continuing trend towards‘better, cost lower’ is helping drive use of impact modifiers, which can be used to either improve properties or maintain properties of thinner parts, comment industry experts.
-Improve impact strength, toughness, shock resistance, cold impact strength,
-Improve low temperature flexibility,softness
-Improve weatherbility,durability and anti-aging
-keep good plasticization products at the low temperature.
Packaing&Delivery
1.Measure according to the package, net wt 25kg per pack
2.Products are shipped via Sea.air flight. EMS.DHL.UPS.Fedex,TNT ect..
3.L/C.TT..WEST UNION.PAYPAL. available.
4.Kept in dry and ventilating place, avoid moisture, insolation and fire. No mix with other chemicals.
Test Notes :
1. To test the results of adding A-868 please wait for at least 24 hours after extrusion, injection molding or blow molding , for the effect is much more obvious at that time.
2. Please use the same kind of rubber material for comparison.
If have more inquiry or need samples to test , please feel free to contact :
CONTACT PERSON
Lyen
Mob/Wechat/WhatsApp: 86-13417457738
Skype: huang.lyen
Web: www.impact-modifiers.com
